Slim Fit Wall Mount Installation Guide (One Connect)
Important Note: The information on this page is for Hong Kong products only. Models, sequences or settings will vary depending on location and/or where the product had been purchased. To be redirected to your local support page please click here.
The Slim Fit Wall Mount for Samsung TVs creates a minimalist look that compliments any type of décor. The design safely and securely attaches your TV flush against the wall while providing enough space to attach the One Connect Box cable.
Each bracket requires 3 pilot hole marks.
Ensure the brackets are correctly positioned. Do not switch left and right.
Good to Know
- Check the wall type before installing.
- Always consult an expert for installing on a drywall, Sheetrock, or gypsum board.
- Do not fix it to drywall without any reinforcement.
- Be sure to check the location of wooden studs in the
wall before drilling holes and installing screws. - Minimum wood stud size: 51 x 102 mm (2 x 4 in).
Drill holes (3 mm/ 1/8th in wide) first before installing screws. - A standard stud distance is supported. (16", 18", 24")
- Screw holes must be drilled in the center of studs.
- Studs can split when you attach the TV to the wall mount
if the holes were not made in the center of each stud. - To separate the TV from the wall mount, first disconnect the cables before lifting up the TV.
Ensure that the TV is lifted up by at least two persons.
If the above information does not match what your product is showing, you may check the User Manual for your product. If you are unable to solve the problem, please contact us for further assistance.
Thank you for your feedback!
Please answer all questions.
RC01_Static Content : This text is only displayed on the editor page